The Rifle Stand almost done

Discussion in 'General Firearms Discussion' started by MikeH121, April 12, 2014.

  1. MikeH121
    Offline

    MikeH121

    Final sanding, finish and holes for the wooden 50BMG rds I made. To go into the mortised board in the middle. On the outside on each end.

    Before the top pieces and the mortise.

    stand1.JPG

    Almost done, put the Mosie on to show how it sits.

    stand2.JPG

    stand3.JPG

    stand4.JPG
     
  2. daniellawecki
    Offline

    daniellawecki

    924
    27
    toledo
    Nice job really coming together
     
  3. looks good.
     

Share This Page