Sionics 2-day AR15 Armorer Course - October 21st and 22nd - Columbus, OH

Discussion in 'Tactics & Training' started by munch520, August 23, 2012.

  1. munch520
    Offline

    munch520

    1
    0
    [​IMG]

    Instructor: Iraqgunz
    Dates: October 20-21, 2012
    Time: 8-5 both days
    Location: Black Wing Shooting Center - Delaware, Ohio
    Cost: $400 per person
    Necessary gear:
    Carbine (factory or parts gun)
    Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32
    Complete set of roll pin holders- http://www.brownells.com/.aspx/pid=7...LL-PIN-HOLDERS
    Complete set of roll pin punches- http://www.brownells.com/.aspx/pid=3...LL-PIN-PUNCHES
    1†Nylon and Brass Hammer- http://www.brownells.com/.aspx/pid=1...N-BRASS-HAMMER
    Small to medium pair of needle nose pliers.
    Large flat tip screwdriver or variable tip screwdriver set.
    Bolt Catch Pin Punch- http://www.brownells.com/.aspx/pid=2...ATCH-PIN-PUNCH
    Pivot Pin Installation Tool- http://www.brownells.com/.aspx/pid=2...TALLATION-TOOL
    Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc…

    NO live ammunition in classroom

    Sionics Weapons Systems is proud to bring you the 2 day armorer course designed to cover the AR15 family of weapons. Unlike many courses that are restricted to law enforcement or military, Sionics believes in the right to bear arms for all law abiding citizens.

    Overview
    This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with fully functional weapons provided by Sionics. At the conclusion of the course all students should be able to assemble a fully functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered.

    The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.

    TD 1
    -Introduction to the AR15 platform, its history, and cycle of operation
    -Parts breakdown and nomenclature
    -Required tools and equipment needed
    -Basic disassembly and reassembly

    TD 2
    -Overview of TD 1
    -Inspection criteria
    -Troubleshooting
    -Complete and detailed disassembly and assembly of weapon
    -Written test and certificate issuance

    Instructor Bio
    This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard. Having completed a deployment to the Middle East in support of operations Iraqi and Enduring Freedom in 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and SigSauer.

    I will update this thread as we get close to filling capacity. Give me a shout with any further questions regarding:
    -local accommodation details
    -directions
    -any other questions
     

Share This Page