Refinshing

Discussion in 'Engraving & Refinishing' started by daniellawecki, December 25, 2013.

  1. daniellawecki
    Offline

    daniellawecki

    995
    32
    toledo
    Started working on Blackhawk 41 mag took ejector rod schroud off and stripped it down. Have grip frame off stripped 90 percent of the finish off. I will use 2000 grit sandpaper scotchbite and either never dull wool or rouge on a dremel tool with polishing cloth wheels. Home Depot sells a kit for around $14.00. I found some nice grips with Ruger Medallions the wood is Mexican Bocote. I plan on wolf trigger spring kit Bowen rear target sites. I've never shot this gun but it was new in box paid $300.00 for it from a friend. This will be my first shot at this I saw one done on Single Sixguns forum and also on Wedealinlead form really tripped my trigger.:)
     
  2. daniellawecki
    Offline

    daniellawecki

    995
    32
    toledo
    Update the ejector rod shroud likes like
    its been chromed is bright no sanding marks later today I'll finish the frame just polished the inside parts.
     
    Last edited: January 27, 2014
  3. daniellawecki
    Offline

    daniellawecki

    995
    32
    toledo
    Update the gun is finished and will post pics later. Still unfired but when I finish reloading all my brass it will go for a test ride. There are several web sites to help people with simple gun projects. So lets here about some of yours next will be a stock refinishing on a older 10/22 .
     

Share This Page